EN 10374:2021
(Main)Welded fittings for the food and chemical industries - Tees, bends and reducers for welding
Welded fittings for the food and chemical industries - Tees, bends and reducers for welding
This document specifies dimensions, tolerances, internal and external surface characteristics and marking of welded fittings for the food and chemical industry.
Formstücke zum Anschweißen in der Lebensmittel- und chemischen Industrie - T-Stücke, Bogen und Reduzierstücke zum Anschweißen
Dieses Dokument legt die Abmessungen, Toleranzen, Eigenschaften der Innen- und Außenflächen sowie die Kennzeichnung von geschweißten Formstücken für die Lebensmittel- und chemische Industrie fest.
Raccords soudés pour l'industrie alimentaire et chimique - Tés, coudes et réductions à souder
Le présent document spécifie les dimensions, tolérances, caractéristiques des surfaces internes et externes et marquages des raccords soudés pour les industries chimique et alimentaire.
Varjeni spojni elementi za živilsko in kemično industrijo - Odcepi, kolena in reducirni elementi za varjenje
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 10374:2021
01-november-2021
Varjeni spojni elementi za živilsko in kemično industrijo - Odcepi, kolena in
reducirni elementi za varjenje
Welded fittings for the food and chemical industries - Tees, bends and reducers for
welding
Anschweißarmaturen in der Lebensmittel- und chemischen Industrie - T-Stücke, Bogen
und Reduzierstücke zum Anschweißen
Raccords soudés pour l'industrie alimentaire et chimique - Tés, coudes et réducteurs à
souder
Ta slovenski standard je istoveten z: EN 10374:2021
ICS:
23.040.40 Kovinski fitingi Metal fittings
SIST EN 10374:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 10374:2021
---------------------- Page: 2 ----------------------
SIST EN 10374:2021
EN 10374
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2021
EUROPÄISCHE NORM
ICS 23.040.40
English Version
Welded fittings for the food and chemical industries - Tees,
bends and reducers for welding
Raccords soudés pour l'industrie alimentaire et Formstücke zum Anschweißen in der Lebensmittel-
chimique - Tés, coudes et réductions à souder und chemischen Industrie - T-Stücke, Bogen und
Reduzierstücke zum Anschweißen
This European Standard was approved by CEN on 11 July 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10374:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 10374:2021
EN 10374:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Symbols and abbreviated terms . 6
5 Designation of fittings and steel grades . 7
5.1 Designation of fittings . 7
5.2 Elbow . 7
5.3 Reducer . 7
5.4 T-piece . 7
5.4.1 T-piece form TL and form TS . 7
5.4.2 T-piece form TRL and form TRS . 7
5.5 Designation of steel grades .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.