iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST-TP CEN/TR 18042:2024

(Main)

Safety of amusement rides and amusement devices - Replies to requests for interpretation of EN 13814:2019 and its parts

Safety of amusement rides and amusement devices - Replies to requests for interpretation of EN 13814:2019 and its parts

The purpose of this CEN Technical Report is to provide replies to requests for interpretations of all parts to EN 13814:2019.

Sicherheit von Fahrgeschäften und Vergnügungsanlagen - Antworten zu Anfragen zu EN 13814:2019 und dessen Teile

Varnost zabaviščnih vozil in naprav za zabavo - Odgovori na zahteve za razlago standarda EN 13814:2019 in njegovih delov

General Information

Status
Published
Publication Date
22-Apr-2024
ICS
97.200.40 - Playgrounds
Technical Committee
I13 - Imaginarni 13
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Apr-2024
Due Date
16-Jun-2024
Completion Date
23-Apr-2024
Ref Project
CEN/TR 18042:2024 - Safety of amusement rides and amusement devices - Replies to requests for interpretation of EN 13814:2019 and its parts

Buy Standard

TP CEN/TR 18042:2024 - BARVETP CEN/TR 18042:2024 - BARVE
PreviousNext
Technical report
TP CEN/TR 18042:2024 - BARVE
English language
90 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 18042:2024
01-junij-2024
Varnost zabaviščnih vozil in naprav za zabavo - Odgovori na zahteve za razlago
standarda EN 13814:2019 in njegovih delov
Safety of amusement rides and amusement devices - Replies to requests for
interpretation of EN 13814:2019 and its parts
Sicherheit von Fahrgeschäften und Vergnügungsanlagen - Antworten zu Anfragen zu EN
13814:2019 und dessen Teile
Ta slovenski standard je istoveten z: CEN/TR 18042:2024
ICS:
97.200.40 Igrišča Playgrounds
SIST-TP CEN/TR 18042:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TP CEN/TR 18042:2024

---------------------- Page: 2 ----------------------
SIST-TP CEN/TR 18042:2024


CEN/TR 18042
TECHNICAL REPORT

RAPPORT TECHNIQUE

April 2024
TECHNISCHER REPORT
ICS 97.200.40
English Version

Safety of amusement rides and amusement devices -
Replies to requests for interpretation of EN 13814:2019
and its parts
 Sicherheit von Fahrgeschäften und
Vergnügungsanlagen - Antworten zu Anfragen zu EN
13814:2019 und dessen Teile


This Technical Report was approved by CEN on 23 March 2024. It has been drawn up by the Technical Committee CEN/TC 152.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 18042:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TP CEN/TR 18042:2024
CEN/TR 18042:2024 (E)
Contents Page
Introduction . 8
1 Scope . 10
2 Normative references . 10
3 Terms and definitions . 10
4 EN 13814-1:2019, Safety of amusement rides and amusement devices — Part 1:
Design and manufacture . 10
4.1 General. Interpretation request – ESMA . 10
4.2 1. Scope . 11
4.2.1 1. Scope (interpretation request – SII) . 11
4.2.2 1. Scope (interpretation requests – UNI 002-013, 001-086) . 11
4.3 3. Terms and definitions . 12
4.3.1 3.4 Barrier (interpretation request – UNI 003-015) . 12
4.3.2 3.5 Closed restraint (interpretation request – DIN X5) . 12
4.3.3 3.23 Machinery component (interpretation request – UNI 004-014) . 12
4.3.4 3.41 Safety-related part or component (interpretation request – UNI 005-016) . 13
4.3.5 3.XX (interpretation request – DIN X4) . 13
4.4 4. Requirements for design analysis . 14
4.4.1 4. Requirements for design analysis (interpretation request – UNI 092) . 14
4.4.2 4. Requirements for design analysis (interpretation request – UNI 093) . 14
4.4.3 4. Requirements for design analysis (interpretation request – UNI 094) . 15
4.4.4 Principles of analysis (interpretation request
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 13814-2:2019(Main)
Safety of amusement rides and amusement devices - Part 2: Operation, maintenance and use
EN 13814-2:2019

This document specifies the minimum requirements necessary to ensure the safe maintenance, operation, inspection and testing of amusement ride and amusement devices which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations.
Fixed grandstands, construction site installations, scaffolding, removable agricultural structures and simple coin operated children's amusement devices, carrying not more than two children, are not covered by this document.
Existing national rules on workers' safety are not concerned by this document.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13814-3:2019(Main)
Safety of amusement rides and amusement devices - Part 3: Requirements for inspection during design, manufacture, operation and use
EN 13814-3:2019

This third part of EN 13814 defines requirements for the necessary inspections of amusement devices designed, manufactured, operated and used according to EN 13814-1 and EN 13814-2.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13814-1:2019(Main)
Safety of amusement rides and amusement devices - Part 1: Design and manufacture
EN 13814-1:2019

This document specifies the minimum requirements necessary to ensure the safe design, calculation, manufacture, and installation of mobile, temporary or permanently installed machinery and structures which are intended for use by persons as a leisure activity, e.g. roundabouts, swings, boats, Ferris wheels, roller coasters, chutes, grandstands, membrane or textile structures, booths, stages, side shows, and structures for artistic aerial displays. The above items are hereafter called amusement devices, which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations. Fixed grandstands, construction site installations, scaffolding, removable agricultural structures and simple coin operated children's amusement devices, carrying up to three children, are not covered by this document.
Nevertheless this document may be used in the design of any similar structural or passenger carrying device not explicitly mentioned herein.
Existing national rules on workers' safety are not concerned by this document.
This document is applicable to manufacturing and major modification of amusement devices and rides manufactured to designs after the effective date of publication.
This standard does not apply to manufacture of pre-existing designs made according to EN 13814:2004 for a period of 5 years following the publication of the present standard.
prEN 13814-3:2016 contains requirements for inspection during design, manufacture, operation and use.

  • Standard
    176 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13814-1:2019/oprA1:2023(Amendment)
Safety of amusement rides and amusement devices - Part 1: Design and manufacture
EN 13814-1:2019/prA1

This document specifies the minimum requirements necessary to ensure the safe design, calculation, manufacture, and installation of mobile, temporary or permanently installed machinery and structures which are intended for use by persons as a leisure activity, e.g. roundabouts, swings, boats, ferris wheels, roller coasters, chutes, booths, side shows, and structures for artistic aerial displays. The above items are hereafter called amusement devices, which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations. Grandstands, construction site installations, scaffolding, removable agricultural structures, simple coin operated children's amusement devices, carrying up to three children, and recreational devices like waterslides or summer toboggan runs, playground equipment, rope courses, climbing wall, inflatable, trampolines, swimming pool equipment (this list is not exhaustive) are not covered by this document.
For all the equipment not covered by the requirements of EN 13814-1, the relevant standards apply.
Nevertheless this document can be used in the design of any similar structural or passenger carrying amusement device not explicitly mentioned herein.
In terms of workers’ health and safety, national regulations apply.
This document is applicable to manufacturing and major modification of amusement devices and rides for designs after the effective date of publication.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13814-3:2019/oprA1:2023(Amendment)
Safety of amusement rides and amusement devices - Part 3: Requirements for inspection during design, manufacture, operation and use
EN 13814-3:2019/prA1

This part of EN 13814 defines requirements for the necessary independent inspections of amusement devices designed, manufactured, operated and used according to EN 13814-1:2019 and EN 13814-2:2019.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13814-2:2019/oprA1:2023(Amendment)
Safety of amusement rides and amusement devices - Part 2: Operation, maintenance and use
EN 13814-2:2019/prA1

This document specifies the minimum requirements necessary to ensure the safe maintenance, operation, inspection and testing of amusement ride and amusement devices which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations.
Grandstands, construction site installations, scaffolding, removable agricultural structures, simple coin operated children's amusement devices, carrying up to three children, and recreational devices like waterslides or summer toboggan runs, playground equipment, rope courses, climbing wall, inflatable, trampolines, swimming pool equipment (this list is not exhaustive) are not covered by this document.
In terms of workers’ health and safety, national regulations apply.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1177:2018+A1:2024(Main)
Impact attenuating playground surfacing - Methods of test for determination of impact attenuation
EN 1177:2018+A1:2023

This European Standard specifies the test apparatus and the impact test methods for determining the impact attenuation of surfacing by measuring the acceleration experienced during impact. Test apparatus in compliance with this standard are applicable to tests carried out in a laboratory or on site by either methods described.
NOTE   The test methods described in this standard are also applicable for impact areas required in other standards than for playground equipment, e.g. for outdoor fitness equipment and parkour equipment.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 17994:2024(Main)
One post equipment - Inspection guidance
CEN/TR 17994:2023

The purpose of this document is to supplement the information on “one post equipment” contained in
EN 1176-1 and to share good practice for the implementation of the requirements in that standard.

  • Technical report
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1176-1:2018+A1:2024(Main)
Playground equipment and surfacing - Part 1: General safety requirements and test methods
EN 1176-1:2017+A1:2023

This part of EN 1176 specifies general safety requirements for permanently installed public playground equipment and surfacing. Additional safety requirements for specific pieces of playground equipment are specified in subsequent parts of this standard.
This part of EN 1176 covers playground equipment for all children. It has been prepared with full recognition of the need for supervision of young children and of less able or less competent children.
The purpose of this part of EN 1176 is to ensure a proper level of safety when playing in, on or around playground equipment, and at the same time to promote activities and features known to benefit children because they provide valuable experiences that will enable them to cope with situations outside the playground.
This part of EN 1176 is applicable to playground equipment intended for individual and collective use by children. It is also applicable to equipment and units installed as children's playground equipment although they are not manufactured as such, but exclude those items defined as toys in EN 71 and the Toys Safety Directive.
It is not applicable to adventure playgrounds with the exception of those items which have been commercially sourced.
NOTE   Adventure playgrounds are fenced, secured playgrounds, run and staffed in accordance with the widely accepted principles that encourage children's development and often use self-built equipment.
This part of EN 1176 specifies the requirements that will protect the child from hazards that they might be unable to foresee when using the equipment as intended, or in a manner that can be reasonably anticipated.
The use of electricity in play equipment, either as a play activity or as a motive force, is outside the scope of this standard. The attention of users is drawn to European and local national standards and regulations which are to be complied with when using electricity.
Play equipment placed in water and where water can be seen as impact attenuating surfacing is not fully covered by this standard and additional risks are associated with wet environments.
The risk of exposure to excessive levels of UV radiation is not covered in this standard.

  • Standard
    102 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1176-10:2023(Main)
Playground equipment and surfacing - Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment
EN 1176-10:2023

This document is applicable to fully enclosed play equipment intended for installation inside and outside buildings, for children up to 14 years old, see 3.1.
The purpose of this document is to provide additional safety requirements covering particulars of these structures.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day